Preparing Outer Digester Wall for Pre-stressing |
Continued Application of Shotcrete onto Clarifier Exterior Wall Surface |
Continued Application of Shotcrete onto Clarifier Exterior Wall |
42-in Return Activate Sludge/Waste Activated Sludge (RAS/WAS) line. |
42” RAS/WAS Line |
View of Construction of Oxidation Ditch #1 from 42” RAS/WAS Line |
Trench for 8” Drain Line for Oxidation Ditch #2 |
Setting Re-bar for Oxidation Ditch # 1 Base Slab |
Re-bar for Oxidation Ditch #1 Base Slab |
QA/QC Check of Re-bar |
Project Sign |
Setting Re-bar for Interior of Clarifier |
Re-bar Set Against Diaphragm Form for Interior of Clarifier |
42” RAS/WAS Line |
8” Drain line for Ox-Ditch #2 |
Forming of Inside Launder for Clarifier |
Re-bar for Inside Lauder or Clarifier |
Setting Vertical Section of 42” RAS/WAS Line |
42” RAS/WAS Installation |
Reclaimed Water Distribution Line for a RIB |
OCWS Crew Setting Reclaimed Water Pipe |
OCWS Crews Setting 30-in Reclaimed Water distribution Pipe for RIBs Project |
OCWS Crews Setting 45s in Reclaimed Water Distribution Lines for RIBs Project |
OCWS Crews Staging 30-in Reclaimed Water Distribution Lines for RIBs Project |
Erecting Diaphragm for Exterior Wall of Digester |
Wall Penetrations to Exterior Wall of Digester |
Clarifier #1 |
Gallery for 42-in Return and Waste Activated Sludge Lines |
Interior of Clarifier |
Base of Digester Exterior Wall |
Preparing Interior of Clarifier Wall for Shotcrete Application |
View of the Site from the Stormwater Detention Basin |
Continued Application of Shotcrete to Digester Exterior Wall |
30-in Effluent lines from the Treatment Plant to the RIBs |
30-in Effluent lines from the Treatment Plant to the RIBs |
30-in Effluent lines from the Treatment Plant to the RIBs |
Erecting Diaphragm for Outer Ring Wall |
Outside Wall and Slab Interface for Oxidation Ditch |
Diaphragm for Oxidation Ditch Exterior Wall |
Vapor Barrier for Oxidation Ditch Base Slab |
